The aero bike has a new benchmark\nThe natural evolution of our high-end aero product used by professionals.\nFilante SLR is an extremely lightweight aero bike that dramatically improves the ratio of torsional stiffness to weight, stiffness to weight. We u
\n
The natural evolution of our high-end aero product used by professionals.
\n
Filante SLR is an extremely lightweight aero bike that dramatically improves the ratio of torsional stiffness to weight, stiffness to weight. We used the same materials and technology used in the construction of Wilier 0 SLR.
\n
The result is a very high-end, aerodynamic frame that complements our pure climbing bike now used by Astana Qazaqstan Team.
\n
\n
Filante SLR was designed to give maximum aerodynamic performance in real-world environmental conditions. The study was based on data collected in the wind tunnel (where the wind is very clean for consistent empirical results) while also taking the real world into consideration. In doing so, we not only evaluate typical wind tunnel data (yaw angles from -20° to + 20°) but also consider turbulence in the environment that interferes with the bike for the most different reasons.
For this reason we redesigned the profiles, starting from the NACA / KAMM standard but no longer with sharply cut edges on the rear. Softened corners then, allowing better performance even when airflow is disrupted.
The inside of the front fork has been widened by 7mm and is thus 13.6 percent wider than the Cento10PRO fork. In doing so, we moved the fork stanchions away from the wheel, reducing turbulence and thus improving aerodynamics.
\n
\n
The new aerodynamically optimized profiles allowed us to save additional weight in the construction of the frame. The shape without a sharp edge requires less material and less resin in the corners. Thus the interior is more homogeneous and allows the weight of the frame to stop the needle of the scale at 870 grams.
The bike assembled with top-of-the-line specifications weighs 6.8 KG.
The carbon used to build the Filante monocoque is the same as Wilier 0 SLR. Thanks to the different types of carbon usedi along with Liquid Cristal Polymer, special fiber positioning and construction technology we were able to achieve an absolute level of lightness and stiffness.
The lower overall weight related to the very high level of torsional stiffness has increased the STW by 12.5 percent. This improvement is clearly felt with the precision of the ride and the feeling of safety at high speeds.
\n
\n
With the steerer tube no longer beveled, we can install up to 35mm of spacers below the crease. By combining frame sizes, crease sizes and spacers we can thus obtain 240 different fittings, with no overlap between one combination and the next. This figure doubles when considering the two available seatposts, with either 15mm or 0mm setback.
\n
\n
In addition to being lightweight (350 grams for size 101×42), the new integrated Filante Bar carbon monocoque handlebar accommodates brake and control cables inside, routing them inside the frame. It has an essential design, with sinuous, rounded lines to ensure maximum ergonomics in grip.
\n
\n
The spacers interposed between the head tube of the frame and the handlebar are made of high-stiffness composite material, with a special cavity dedicated to cable routing. They are composed of two parts so they can be quickly assembled and disassembled without interfering with the cables that run between the handlebar and frame.
\n
\n
Six sizes, unique feel. The tube sections in the various sizes are designed so that stiffness, ride quality and comfort are the same on each different frame size.
\n
\n
These pins allow quick removal of the wheel from the frame without having to pull the pin totally out of the wheel hub. This solution significantly reduces wheel removal and housing time. In racing, a wheel change saves an average of 7 seconds compared to a traditional thru-bolt.
\n
\n
| Groupset | SHIMANO ULTEGRA 8170 DI2 12S |
| Wheelset | RX26 Alu |
| Frame | FILANTE 0 SLR – CARBON MONOCOQUE HUS MOD + CRYSTAL LIQUID POLYMER |
| Fork | FILANTE 0 SLR – CARBON MONOCOQUE HUS MOD + CRYSTAL LIQUID POLYMER |
| Handlebar | FILANTE BAR INTEGRATED CARBON |
| Headset | FSA CUSTOM BEARINGS MR137 |
| Shifters | SHIMANO ULTEGRA ST-R8170 DI2 |
| Brakes | SHIMANO ULTEGRA BR-R8170 |
| Rotors | SHIMANO ULTEGRA RT-MT800 CENTER LOCK 160MM / 140 MM |
| Front Derailleur | SHIMANO ULTEGRA FD-R8150 DI2 |
| Rear Derailleur | SHIMANO ULTEGRA RD-R8150 DI2 |
| Frame Weight | 870 G +/- 5% |
| Crankset | SHIMANO ULTEGRA FC-R8100 |
| Bottom Bracket | SHIMANO ULTEGRA PRESS FIT SM-BB72 |
| Sprocket | SHIMANO ULTEGRA CS-R8100 12S |
| Chain | SHIMANO ULTEGRA CN-M8100 12S |
| Tires | VITTORIA CORSA 700X28 |
| Saddle | SELLE ITALIA FLITE BOOST COVERED |
| Seatpost | FILANTE CUSTOM MADE -15 MM/0 MM |
| Axle / Thru Axle | THRU AXLE MAVIC SPEED RELEASE WITHOUT LEVER | 12X100 FRONT – 12X142 REAR |
| Cork tape | PROLOGO ONE TOUCH |
| Weight | 7,400 KG +/-5% |
| Fork Weight | 360 G +/- 5% |
At Our Store, we aim to deliver your orders as quickly and efficiently as possible. Below you will find everything you need to know about our shipping and delivery process.
Shipping Methods & Rates
We offer a variety of shipping options to meet your needs. The cost of shipping depends on the shipping method you choose, the destination, and the size of your order. Please refer to the shipping options available at checkout for more details.
Express Shipping: Delivery within 3-5 business days (next-day delivery for some locations).
International Shipping: Available to selected countries. Delivery time and shipping fees will vary based on destination.
Processing Time
Orders are typically processed within 1-2 business days from the time your order is placed. Please note that during peak seasons or promotional periods, processing time may be slightly longer.
Tracking Your Order
Once your order has been dispatched, you will receive an email with tracking information so you can monitor the status of your shipment. You can also check the status of your order in your account under “Order History.”
Delivery Times
Estimated delivery times vary depending on your location and the shipping method selected. For international orders, customs processing may cause delays, which are beyond our control.
Domestic Orders: Typically arrive within 3 business days.
International Orders: Delivery times may range from 7 business days, depending on the destination country and customs clearance times.
Lost or Damaged Packages
While we take great care to ensure your items are packaged securely, accidents can happen. If your order arrives damaged or you believe it’s lost, please contact us at customer service email or phone number within 7 days of receiving your package. We will investigate the issue and provide a solution.
Contact Us
If you have any questions or concerns about shipping and delivery, don’t hesitate to contact our customer support team at customer service email or phone number. We’re here to help!
Thank you for shopping! We appreciate your business and strive to provide you with an exceptional shopping experience.
Reviews
There are no reviews yet.